These Touch Screens are designed for extreme and high-use environments and features superior durability, resolution, accuracy and positioning speed. Resistive touchscreens deliver cost-effective, consistent and durable performance in environments where equipment must stand up to contaminants and liquids, such as in restaurants, factories, and hospitals.

Custom design and sizes between 5.7 to 21.3 inch are available upon request

Overview:

Five-wire resistive is the most accurate and reliable touchscreen technology. 5-Wire Resistive touch technology consists of a glass or acrylic panel that is coated with electrically conductive and resistive layers. The thin layers are separated by invisible separator dots. When operating, an electrical current moves through the screen. When pressure is applied to the screen the layers are pressed together, causing a change in the electrical current and a touch event to be registered. 5-Wire Resistive touchscreens typically have a 3H or 4H hardness rating which means that they will resist scratching from items with pencil point hardness.

Advantages:

High touch resolution
Pressure sensitive, works with any stylus
Not affected by dirt, dust, water, or light
Continued operation even with a cut coversheet (as long as the ITO coating on the glass is not damaged)
Could be operated in the environment with -10° C ~ 60° C
More durable and offer a much greater lifetime and stability than 4-Wire Resistive type

Disadvantages:

80% clarity
Resistive layers can be damaged by a sharp object
Glass is obviously fragile and can be easily broken with a small impact
More expensive than 4-Wire Resistive type

Common Applications:

POS terminals
Financial - ATM & Bill Pay Kiosks
Factory Automation
Industrial Control
Medical Equipment
Retail Kiosks

Specifications:

Touch Screen: 5-Wire Analog Resistive
Diagonal Size: 12.1"
Overall Outline Dimensions (WxHxD mm): 271 ± 0.3 x 206 ± 0.3 x 2.5 ± 0.2
Viewing Area (WxH mm): 252 x 190
Active Area (WxH mm): 248 x 186
Glass: ITO Glass, 2.5mm
Front Material/Thickness: Transparent PET (3H) 0.188 mm
Rear Material/Thickness: Glass/2.1 mm
Connector: FPC, 5-Pin, 2.54 mm pitch
Optical Specifications:
- Film type: Anti-glare, Anti-reflective
- Transparency: Standard 80% ± 3% at 550nm wave length
Electrical Specifications:
- Operation Voltage: 3~7V
- Insulation Impedance: 20MΩ or more
- Linearity: 97.5% (bias less than 2.5%)
- Response Time: 15 msec or less
Mechanical Specifications:
- Input Method: Finger, Stylus or Gloved hand
- Touch Activation Force: 60 - 150g
- Surface Hardness: 3H (Pencil Test)
Reliability:
- Operation Environment: -10° C ~ 50° C
- Storage Temperature: -20° C ~ 50° C
- Writing Life: 1 Million times (100gf force)
- Hitting Life: 10 Million times (100gf force)
- NEMA 4 Capable
Warranty: 1 year