Optrex F-51852 Series 128x64
Monochrome Graphic STN LCDs (STEP Displays)

Optrex F-51852 128x64 dot pixel resolution monochrome graphic LCDs with a 2.8-inch diagonal viewing area for characters and/or graphics display in white, blue, green, red, black or yellow

 

 

A new family of high-legibility monochrome graphic and character LCDs from Optrex offers a unique combination of performance enhancements: a uniform, high-contrast black background for improved legibility, a variety of display colors to choose from, wide operating temperatures, industry standard configurations, compatibility with existing Optrex modules, and RoHS compliance. Applications include consumer audio (such as MP3 players), industrial test and process control equipment, computer peripherals, industrial panel meters and data collection displays, high-end white goods, and medical instrumentation.

 

Optrex's high-legibility graphic and character LCDs utilize the company's High Performance Partial Color technology, which incorporates a high-contrast negative mode panel utilizing an internal black mask and color LED black light to provide a uniform, high-contrast black background for easier viewing. They offer the designer a choice of colors - white, yellow, green, blue and others - all with a consistent background look. The F-51852 are mechanically and electrically compatible with Optrex F-51553 series monochrome character and graphic LCDs, providing an easy upward migration path for designers.

 

The F-51852 supports serial as well as parallel interface. Parallel interface to a mPU requires 13 lines (8 for data and 5 for control). It has a flexible cable with 30 pin connector. The OPTREX F-51852 module does not have an on-board character generator. Compared to other controllers like the Toshiba T6963C, the F-51852 has a limited amount of instructions. However, it is quite easy to interface and program.

 

Low Profile STN Displays with 6mm Depth

 

2.8-inches and a DOT format of 128 x 64; these STN displays are compliant to RoHS regulations and offer colored backlights in Blue, Green, White and White with Blue LCD mode. Also, offered is a transflective display with a White LED backlight for use in direct sunlight.

 

The depth of 6mm is almost half compared to the Standard STN displays, providing designers with a thin display for use in a variety of applications.

Optrex F-51852 Series 128x64 LCDs Features

• Large 2.8" diagonal active area

• Wide temperature range (-20° to +70° C)

• Selectable 8-bit serial or  parallel interface

• 5V supply voltage over entire operating  temperature range

• Integrated display data RAM

• Integrated NJU6676 controller/driver capable to display graphics or  characters

• Internal charge pump for LCD driving  voltage

• White, Yellow, Green, Blue, and other modes versions are available

• 0.5 mm dot pitch (square dots)

• 20 micron spacing between pixels

• Low power consumption

• Compliant with RoHS regulations

Optrex F-51852 Series LCDs Ordering Information

Model	Size	Resolution	LCD Mode / Backlight	Spec	Drawing	Lifecycle	Replacement
F-51852GNFJ-SLW-AEN	2.8	128x64	Blue on White / LED			EOL
F-51852GNFQJ-LG-ACN	2.8	128x64	Green on Black / LED
F-51852GNFQJ-LB-ABN	2.8	128x64	Blue on Black / LED
F-51852GNFQH-LW-AFN	2.8	128x64	White on Black / LED
F-51852GNFQJ-LY-ADN	2.8	128x64	Yellow on Black / LED
F-51852GNFQJ-LR-AGN	2.8	128x64	Red on Black / LED
F-51852GNFQJ-LG-ALN	2.8	128x64	Green on Black / LED
F-51852GNBJ-LW-AKN	2.8	128x64	Blue on White / LED			EOL	TGL28G-12864BW-1
F-51852GNFQJ-LW-AMN	2.8	128x64	White on Black / LED			EOL
F-51852GNFQJ-LB-AIN	2.8	128x64	Blue on Black / LED
F-51852GNFJ-SLW-AJN	2.8	128x64	Blue on White / LED

GUI Solution for Optrex F-51852 Series 128x64 LCDs

TC553/852 Embedded GUI Board

Touch Solution for Optrex F-51852 Series 128x64 LCDs

2.8" 4-Wire Resistive Touch Screen (P/N: TSR-51852)

Optrex F-51852 Supporting Documentation

	NJU676 Application Note (PDF - 47.8 KB)
	Comparison F-51852 vs. F-51553 (PDF - 58.5 KB)