This Touch Screen Controller communicates with PC directly through USB port. This controller is also Human Interface Device (HID) compliant and may be used with any device which has HID drivers and supports USB communication. It comes complete with 11-inch (controller to touch panel) extension cable and 5.5 feet (controller to computer) USB cable. The touch panel driver emulates mouse left and right button function, supports handwriting-recognition technology and supports operation systems including Windows 95 / 98 / ME / NT4 / 2000 / XP / XP Tablet PC Edition / Vista / 7 / 8 / 8.1 / 10 / 11, Windows CE2.12 / 3.0 / 4.0 / 5.0 / 6.0 / 7.0 / 2013 / .NET, DOS, Linux and iMac.

Features:

• Calibration: Fast full oriental 4 points position
• Compensation: Accuracy 25 points linearity position, Edge compensation
• Draw Test: Position and linearity verification
• Mouse Emulator: Right / Left button emulation, Normal / Click on touch / Click on release mode, Auto right button
• Display Support: Support monitor / display rotation, Support multiple monitor / display, Support QVGA and Half-VGA function, Support split monitor
• Handwriting Feature Support: Support handwriting-recognition technology

Specifications:

• Power requirements: +5VDC, typical 70mA
• Operating temperature: -20°C to 70°C
• Storage Temperature: -30°C to 85°C
• Relative Humidity: 95% at 60°C
• Protocol: USB 1.1 Low speed
• Data Output: HID Compliant
• Resolution: 2048 X 2048
• Accuracy Tolerance: Max. +/- 0.5% tolerance
• Report rate: Max. 160 points/sec, automatically adjust in 3 rates: 40, 80, 160, ensure data stability
• Response time: Max. 24 ms, automatically adjust in 3 rate times: 6ms, 18ms, 24ms
• Regulatory Approvals: FCC-B, CE
• Pin Out Definition: X, Y, X, Y
• Panel resistance: 50 ~ 900 ohm (pin to pin on the same layer)
• Dimensions (L x W): 68 mm (2.7 in) x 20 mm (0.79 in)
• Warranty: 2 years

Documents:

• 4-Wire USB/HID TouchScreen Controller Dimensions (pdf - 191 KB)
• TouchScreen Controller Specifications (pdf - 1.82 MB)
  
• 4 Wire Flat Cable Drawing (pdf - 88.1 KB)
• USB Cable Drawing & Pin Assignement (pdf - 129.0 KB)
• 4 / 5 Wire Resistive Touch Screens & Controllers FAQ (htm)
• HID Touch Screen Controller Installation Guide (Windows Vista) (pdf - 1.11 MB)
• HID Touch Screen Controller Installation Guide (Windows 7) (pdf - 1.10 MB)
• Ubuntu 12.04 Touchscreen Calibration Guide (Ubuntu 11.04 or later) (pdf - 297 KB)

TouchKit Drivers & Software:

• Windows® 10/11 (V5.14.0.24308 - 2024/11/06 - 10.5 MB)
• Windows® 10/11 (V5.14.0.15315 - 2016/07/11 - 10.2 MB)
• Windows® 8/7/Vista/XP/2000 (V5.10.0.8706 - 2012/02/07 - 9.41 MB)
• Windows® 9X/ME (V3.8.0.6617 - 2009/08/31 - 3.31 MB)
• Windows® NT4.0 (V3.6.0.6917 - 2009/08/31 - 3.26 MB)
• Windows® CE (.NET(4.2, 5.0), 2.12, 3.0, 6.0, 7.0, 2013 - 26.4 MB)
• Windows® XP Embedded (V5.13.0.12628 - 2014/05/20 - 7.54 MB)
• DOS (V6.00.07.6509 - 2007/07/23 - 260 KB)
• iMac (Mac OS 9.x, Mac OS X, Mac OS X Intel CPU - 6.62 MB)
• Linux Kernel 2.4
  • eGalaxTouch-3.06.5605-32b-k24.tar.gz (V3.06.5605 - 2011/08/10 - 3.69 MB - 32Bit)
• Linux Kernel 2.6.23
  • eGalaxTouch-3.07.6014-32b-k26.tar.gz (V3.07.6014 - 2012/02/08 - 13.2 MB - 32Bit)
  • eGalaxTouch-3.07.6014-64b-k26.tar.gz (V3.07.6014 - 2012/02/08 - 9.91 MB - 64Bit)
• Linux Kernel 2.6.24 up & 3.x.x / 4.x.x / 5.x.x / 6.x.x
  • eGTouch_v2.5.13219.L-x.7z (V2.5.13219- 2024/05/09 - 6.54 MB - X86 32Bit / 64Bit)
  • eGTouch_v2.5.11703.L-x.tar.gz (V2.5.11703- 2022/10/03 - 8.38 MB - X86 32Bit / 64Bit)
• Linux ARM / MIPS Kernel 2.6.24 up & 3.x.x / 4.x.x / 5.x.x / 6.x.x
  • eGTouch_v2.5.13219.L-ma.7z (V2.5.13219 - 2024/05/09 - 1.89 MB - ARM/MIPS)
  • eGTouch_v2.5.11703.L-ma.tar.gz (V2.5.11703 - 2022/10/03 - 2.33 MB - ARM/MIPS)